Tools

Written By Dale Jenner

To fit a set of Kut Snake flares to your vehicle, there are a few things that are needed to make the job go smoothly. They are not hard to fit but care is needed when drilling through your guards as you have to get it right first time. Here are a few "Tools" to help with installation.

TOOLS NEEDED:

  1. Drill with 4mm drill bit

  2. Allen Key (hand tightening will help reduce over tightening)

  3. Heat Gun

  4. Sika Flex Sealant or Super Glue.

Dale Jenner
Next

Tips & Tricks